Dec 03, · Painting and modifying nerf guns WITHOUT taking apart and short paint review. Nov 23, · So today i just wanted to catch up and show you how to make a spray painted Nerf gun Musicaly: @matthewpag Snapchat: Matthew Pag.
Steampunking Nerf guns by painting them is a pretty common practice among Steampunks, but unfortunately, the really amazing-looking ones involve literally taking the gun apart, painting it, and then screwing it all back together. Well, I'm glad that some people can do that, but let me tell you something: I have never been able to put a Nerf gun back together once I've taken it apart, and then had what is the origin of most federal bureaus still work.
I understand that there's some form of skill what are the codes for angry birds star wars 2 it, but it may as well be rocket science to me. So instead, I'm going to show you how to paint a Nerf gun without taking it apart. The only thing you need for this tutorial is whatever color spray paint you intend to use, and some painter's tape! It's blue, and you'll see it used extensively in this tutorial.
I picked this gun up at the thrift store for 99 cents. You can still see the price tag on it in the picture below! This gun is from the 'Dart Tag' series of guns, and I thought it would make a cool-looking Steampunk gun that would prevent me from having to make yet another Steampunk Nerf Maverick. Before we even get any further, let me identify some problem areas. First we have some Nerf logos:. As you can see, we have a "Dart Tag" bit that's painted directly onto the plastic, and then a raised Nerf logo made of plastic.
This next one was the hardest to take care of, though:. It's hard to see because it doesn't really stand out it's green-on-greenbut on the right side of the above picture is a whole aapart of pqint text.
Yeah, you heard me: sand the crap out of it. This stage will take a long time, so you'd better be prepared to put some elbow grease into it. A few tools will make this job easier for you, but you're probably going to end up doing the fine work with sandpaper, spart a sanding block. A Dremel rotating tool will help speed things up, and a takinng sander will help, too.
Start with a coarser grit, and move to a finer grit in order to get a nice, smooth surface. That said, it's not quite as easy as that. First, what parts of the gun do you sand? Usually I recommend sanding anything that you intend to paint, but there are so many textures and nooks on this gun that sanding evenly is nearly impossible.
So in this case, I didn't sand anything other than the parts where I needed to get rid of Nerf logos. However, I did go over the whole gun and sand away any visible seams and plastic protrusions. It looks pretty rough, I know. It's hard to get a smooth surface on plastic when you're using a Dremel. Do it too fast, and the plastic melts. Here's the same side after I've gotten rid of the "Dart Tag" logo:.
After this point, power sanders won't really help takong due to the odd shape of the gun, so it was time to do it all by hand. In order to make it look even, I had to smooth out the entire barrel with a sanding block, not just the areas where I used the Dremel. Once you're done sanding and you're satisfied that you've got it smooth, it's time to apply your first coat of paint.
Because I couldn't sand the whole gun, I decided to use a coat of primer underneath the paint. That way, the paint will have something to stick to without the texture from sanding. You may note that I've put tape over the trigger. This is because I didn't want the extra primer layer on the trigger.
I was afraid that if I got too many layers of paint on the trigger, it would ppaint off when the trigger was pulled. Okay, so, here's the thing. I went ahead and taped off sections of the gun, because I'm dumb. The best way to do this is to apply a full coat yaking whatever the primary color of the gun is, on uverse what channel is abc taping.
So, let's say you want the majority of the gun to be gold. You would spray paint the entire gun gold, and then cover the gold parts with tape when you spray the rest of the gun.
Let me make something very, very clear: applying tape in exactly the right position is a time-consuming, annoying process. If you go too quickly or don't pay enough attention to the details, your paint job will look sloppy. Unfortunately, I forgot to take a picture of the gun when it was just brass and gray, but I'm sure you can use your imaginations. With my gun now brass and gray, I then covered all of the brass parts, leaving the gray bits bare.
This way, I can paint the gray parts, and not the brass parts:. The gun came out alright, though it isn't the best paint job I've ever painh. Still, I'm pleased with it, considering that I spent 99 cents on the gun!
If I minecraft how to make a powered rail more committed to making it look good, I could have done more colors, or a better job at mixing the colors up. They have a lot of little nooks, so make sure you paint it wthout every conceivable angle in order to get the paint into those crevices. It's not always an easy thing to do that without overpainting certain areas, so be what to do in greece in april Also, if you have the time and energy, you may want to do more to the gun than just paint it.
Wait for my upcoming article on Greebling! Want to master Microsoft Excel and take your work-from-home job prospects to the next level? Jump-start your career with our Premium A-to-Z Microsoft Excel Training Aprt from the new Gadget Hacks Shop and get lifetime access to more than 40 hours of Basic to Advanced instruction on functions, formula, tools, and more. Nice work Austin. I learned a bit about sanding and polishing concave and convex surfaces whilst refinishing cutthroat razors.
I am certainly not experienced enough to say it with any authority but I think many of the sanding and polishing techniques would translate into the prep work of gun barrels and other similarly shaped gyn.
Copper barrel sleeve, brass or plated receiver section and a combination of the two for the globular air tank. It makes only good sense to do this in plastic first. Mock ups are a must when making stuff like this. What better way to test the finish combinations that painting plastics with your techniques?
Besides, you wind up with a nice prop for any costume event you want to attend. Sanding and polishing concave and convex surfaces isn't that bad, the worst is sanding things in tight paiht, or right angles. As a final touch I would suggest doing a "wash" of either black or bronze to help weather it and make it look more "realistic". I used 1 part flat black acrylic to 9 parts water or glass cleaner in a spray bottle on a Star Dithout blaster and it really gave it that used look.
At our second hand store that benefits cats and dogs, there is a special room of just toys. So as not to appear to be a perv, I wait until there are no kids in the room or ask my wife to go in with me. The point being, they have really great prices on the gunn squirt guns and nerf guns - all 25 cents each. I am working on a special gun that has a toy jet as the basis of the gun. I will show before, during, and after pictures when I finish.
Very well done. I've seen a lot of the Nerf conversions, but this one was pretty straight forward. I like the look of it. Sign Up. Absolutely true, Gonville! Very nice. This steampunk weapon is quite interesting to make. Share Your Thoughts Click to share your thoughts. Hot Latest.
Our Best Phone Hacks
Feb 05, · Hey guys it's Matthew and Today im just catching you up on a few things also Im doing a part 2 on how to spray paint a Nerf gun without taking it apart becua. Feb 19, · The best way to do this is to apply a full coat of whatever the primary color of the gun is, before taping. So, let's say you want the majority of the gun to be gold. You would spray paint the entire gun gold, and then cover the gold parts with tape when you spray the rest of the gun. A nerf gun (of your choice, but again i will be using a Maverick) Some plastic spray paint (krylon fusion plastic works well) one can of black and any number of other colors you want to use.
Hello Ladies and Gentlemen, welcome to my first ible! A nerf gun of your choice, but again i will be using a Maverick Some plastic spray paint krylon fusion plastic works well one can of black and any number of other colors you want to use. An exacto knife some general purpose sand paper or low grit if you want to minimize the risk of making scratches the paint wont cover some blue painting tape a small philips head screw driver I refer to these as tweakers and a cardboard surface for painting on top of a grassy gun is no fun and mom probably wont be happy if you paint her driveway.
For the sake of time and fact that there are numerous different nerf guns i have already taken my maverick apart. There is a wonderful tear down of this gun on iFixit.
Now that you have sanded down and rinsed all the pieces of the gun that you want to paint, you want to make sure they are dry and place them on your painting surface, then cover them with two coats of black you could probably use a gray primer and then black here as well, just make sure it will bond to plastic this layer will help fill in some of the scratches and will make a great surface for adding extra paint.
I used the base layer of black so that when my top layer starts to wear off it will be less noticeable, however if you dont want black to start showing through your paint when it wears off you can use multiple layers of your color of choice however this may not look as good and may require alot more painting.
HOWEVER before you get to adding your colors allow time for the base coats to dry in a dry and safe place for at least 20 to 30 minutes or you will get finger prints on that may never come out without more sanding. Now that your base coat has dried, you want to tape off any areas that you want to keep black or whatever your base coat color is. I recomend painting only one side at a time! If you want to give it a distressed or battle-worn look, could you spray paint it with black and then silver on top then sand it a bit?
Reply 4 years ago. If you wanted it to look like it's black underneath and then there's something silver on top that's wearing off then in theory yeah. However, it's much better to paint it your base color I'm not sure what you are doing, I can't tell whether it would be black or silver, but that's not important and then use model paint and dry brush it onto the edges, or wherever else you wanted to give it a worn effect.
Ace hardware sells model paints and other hardware stores do too, it should be in the model or train section of the store well duh, that's obvious, why did I need to say that? Hobby shops would also carry paints. What gun are you painting, by the way? I'm hoping to custom paint a Nerf Maverick for a Christmas present. I'm not really sure on the dry brush technique. As far as painting goes, I'm not very good at it and I'm scared I'll ruin the gun. I'm probably going to paint on a Maverick as practice beforehand when I can get ahold of an extra one.
If you can offer any suggestions on dry brushing I'd appreciate it. I'm actually also quite new to painting nerf guns. Because my 5 year old neighbor asked me to paint his, I've got only one painted maverick which that neighbor broke, so it's taken apart in a shoebox.
But I guess I would say to get way less paint than you think you need on the brush because it's a ton easier to add more paint and just keep layering that than to get a glob on your work and have to find a way to work it off without damaging the paint underneath or have it looking nasty. It's not hard to dry brush. Just remember to work in a well ventilated area when you are painting and using paint thinner model paints are often oil based so you have to use it.
I'm thinking that I'm going to leave detailing for a later practice project and just try to make the one I'm working on look as if it was manufactured yesterday xD I don't want to end up ruining a gun I mean to give as a gift. I'm going to try to follow the advice I've read up on so that it looks really good. I'm sure that there will be some much more helpful blog posts or youtube videos that can help you.
I'm not anywhere near as experienced. I'm quite lazy.. Is it really necessary to sand the entire gun? I've already disassembled and sanded off the logos and such. The paint jobs I've seen look better and last longer if everything painted gets sanded beforehand and sealed with a clear-coat afterwards.
Reply 7 years ago on Introduction. I am painting my longshot with acrylic, but you should put something clear on it to protect it because the paint can be scratched off when it is dry. Reply 8 years ago on Introduction. Introduction: Paint a Nerf Gun n-strike Maverick. Did you make this project? Share it with us! I Made It! How to Bike-A-Line! Reply Upvote. IrishSnow35 4 years ago. InkeA1 IrishSnow35 Reply 4 years ago. IrishSnow35 InkeA1 Reply 4 years ago.
ArasinS pcanywii Reply 4 years ago. Excellent clear thorough instructions. Can't wait to try on a Hammershot. This is really cool!
You should paint the tip next time so it looks sorta real.